45
Using the LAN/WiFi display function
1. Switch the input signal to LAN/WiFi Display.
2. The following image will be displayed.
3. Make sure that both the projector and your computer/smart device are connected to
the same local area network. You can connect one end of a RJ45 cable to the LAN
port on the projector and the other end to the RJ45 port on your Ethernet or router. Or
you can plug a USB wireless dongle to the USB WiFi socket on the projector. Adjust
the LAN Control Settings
.
4. Open the vPresenter Pro (available on application stores) on your computer/smart
device and start using its features.
• Wireless connectivity allows for up to 8 devices with Wifi dongle.
• Up to 4 connected content sources can be simultaneously shown on a quad split screen.
• Audio cannot output from the projector when using Android devices.
To Next Page
Loading...
