Name: ViewSonic PJD7828HDL
Brand: ViewSonic
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Fine-tuning the image clarity

Correcting keystone

Keystoning refers to the situation where the projected image becomes a trapezoid due to

angled projection.

To correct this, besides adjusting the height of the projector, you will need to manually

correct it following one of these steps.

• Using the remote control

1. Press /// to display the Keystone

correction page.

2. Press to correct keystoning at the top of

the image. Press to correct keystoning at

the bottom of the image. Press to correct

keystoning at the right side of the image.

Press to correct keystoning at the left side

of the image.

• Using the OSD menu

For PJD7828HDL:

1. Open the OSD menu and go to the

DISPLAY > Keystone menu.

2. Press to correct keystoning at the top of the image or press to correct

keystoning at the bottom of the image.

For PJD7831HDL/PJD36HDL:

1. Open the OSD menu and go to the

DISPLAY > Keystone menu.

2. Press Enter. The Keystone correction page is displayed.

3. Highlight Vertical and press to correct keystoning at the top of the image or press

to correct keystoning at the bottom of the image.

4. You can also highlight Horizontal and press to correct keystoning at the right side

of the image. Press to correct keystoning at the left side of the image.

1. Adjust the projected image to the size

that you need using the zoom ring.

2. If necessary, sharpen the image by rotating

the focus ring.

Press /

(PJD7831HDL/PJD36HDL only)

Questions and Answers:

Need help?

Do you have a question about the ViewSonic PJD7828HDL and is the answer not in the manual?

ViewSonic PJD7828HDL Specifications

General