ViewSonic SC-T35 - Page 126

ConguringClientSettings
Conguring Service Access Settings
115
Displays
Click the drop-down menu to enable/disable the use of multiple displays (if
connected) in Remote Desktop sessions.
Two options are available: Normal and Multiple.
Option Description
Normal Uses only the primary display for a Remote Desktop session.
Multiple Uses multiple displays for a Remote Desktop session.
Use Toolbar
Click the drop-down menu to select whether to use the ViewSonic Toolbar on a
Remote Desktop session. The tool bar allows you to adjust a session window size
or suspend a session.
Cursor Auto-hide
Click the drop-down menu to enable/disable the auto-hiding of the mouse cursor
or pointer on inactivity in Remote Desktop sessions.
Use RemoteFX
Click the drop-down menu to disable/enable RemoteFX.
NOTE: Windows
®
RemoteFX™ is a new technology that offers a rich user
experience over a network for remote desktop users.
NOTE: To enable the RemoteFX feature for Remote Desktop sessions on your
SC-T35thinclient,youstillneedtocongurethehostserver.Fordetailed
instructions on how to enable RemoteFX on a host server, please visit
Microsoft Support website at support.microsoft.com.
NOTE: SC-T35 supports up to two Remote Desktop sessions at the same time.
NOTE: SC-T35 can only run one RemoteFX-enabled session at a time. The
second is not allowed. The default for an RDP connection is enabled.
Use Bulk Compression
Clicktoenable/disablethebulkcompressionforthedatatrafcbetweenthe
server and client.
Connection Settings
Item Description
USB Storage Mapping
Click the drop-down menu to enable/disable USB storage mapping.
When Enable is selected, users can access the local USB storage devices, such
asaUSBashdriveandmemorycardreader,inaRemoteDesktopsession.
NOTE: ViewSonic Client Setup also allows you to enable or disable the use of
locally attached USB storage devices. You need to enable locally attached
USBstoragedevicesrstinordertousetheminaRemoteDesktop
session. The default is enabled.
NOTE:ToconguretheuseofUSBstoragedevices,pleaserefertosection
“4.4.3ConguringSettingsforUSBStorageDevices”onpage68.