ViewSonic SC-T35 - Updating Firmware for Your SC-T35 with a USB Flash Drive

180
A.2 Updating Firmware for Your SC-T35 with a USB Flash Drive
A simple picture of how to update the rmware for your SC-T35 thin client can be given by two main steps:
Step 1: Prepare a USB ash drive for rmware update
Step 2: Update the rmware of your SC-T35
NOTE
• Please contact us to get the up-to-date rmware le for your SC-T35.
• Before proceeding, please check the current rmware version and ensure you want
to update it to a new one. To nd out the current rmware version for your
SC-T35, please do the following:
1. On the local Linux desktop of your SC-T35, click START > Settings >
System Information.
2. The System Information window appears.
3. The version of rmware of your SC-T35 thin client is shown under the System
tab.
Step 1: Prepare the USB Flash Drive for Firmware Update
To prepare a USB ash drive for rmware update, please do the following:
1. Format your USB ash drive with the FAT/FAT32 format.
2. Create a folder called rmware on your USB ash drive.
3. On your computer, extract the compressed rmware le (.zip format) to the folder rmware on your USB
ash drive to get the USB ash drive ready for rmware update.