ViewSonic SC-T35 - Page 128

ConguringClientSettings
Conguring Service Access Settings
117
RemoteFX USB Redirection Settings
Item Description
Use RemoteFX USB Redirection
Check/Uncheck to enable/disable locally attached USB devices in a Remote
Desktop session (virtual machine based only).
NOTE: RemoteFX USB Redirection allows the redirection of USB devices into
server-hosted virtual machines (with guest operating systems).
NOTE: RemoteFX USB Redirection is only applicable to the virtual machine based
Remote Desktop service not to session based one. For more information,
please visit Microsoft Support website at support.microsoft.com.
On the client side, please do the following to enable locally attached USB devices
in a virtual machine based desktop:
1. Ensure that the desired USB device has been connected to your SC-T35.
2. Ensure that RemoteFX is enabled on your SC-T35 (see “Use RemoteFX” on
page 115).
3. Click to check Use RemoteFX USB Redirection.
4. A new checkbox appears with the required device driver. Check to enable
the driver.
5. Click Save to apply.
NOTE:YoualsoneedtocongurethehostserveranditsguestOSstoenable
RemoteFX USB Redirection in a Remote Desktop session. For instructions
onserver-sideconguration,pleasevisitMicrosoftSupportwebsiteat
support.microsoft.com.
RD Gateway Sub-tab
Connection Settings
Item Description
Use RD Gateway server
Check/Uncheck to enable/disable the use of an RD Gateway server. When
checked, the following two items in this table appear.
Server Name
Type the name of the RD Gateway server. Ask the network administrator for
this information.
Use my Remote Desktop
credentials for the RD Gateway
Check to use the same set of credentials for authenticating to both the Remote
Desktop computer and the RD Gateway server.
Bypass RD Gateway for
local address
Checktopreventtrafctoandfromlocalnetworkaddressesfrombeingrouted
through the RD Gateway server. This could make your RDP connection faster.