ViewSonic SC-T35 - Page 133

ConguringClientSettings
Conguring Service Access Settings
122
Options Sub-tab
Window Settings
Item Description
Color Depth
Click the drop-down menu to select the desired color depth for a Remote
Desktop session. Five options are available: Automatic, 15 Bit, 16 Bit, 24 Bit,
and 32 Bit.
NOTE: If RemoteFX is enabled, then no matter which color depth you choose
here, 32 bit per pixel will be applied.
NOTE: The Automaticoptionusesthesettingdenedbythehostserver.
NOTE:YoucanconguretheupperlimitofthecolordepthforaRemoteDesktop
session on the host server. In this case, no matter which color depth you
choosehere,thevaluecannotexceedthedenedlimit.
Cursor Auto-hide
Click the drop-down menu to enable/disable the auto-hiding of the mouse cursor
or pointer on inactivity in Remote Desktop sessions.
Use RemoteFX
Click the drop-down menu to disable/enable RemoteFX.
NOTE: Windows
®
RemoteFX™ is a technology that offers a rich user experience
over a network for remote desktop users.
NOTE: To enable the RemoteFX feature for Remote Desktop sessions on your
SC-T35thinclient,youstillneedtocongurethehostserver.Fordetailed
instructions on how to enable RemoteFX on a host server, please visit
Microsoft Support website at support.microsoft.com.
Use Bulk Compression
Clicktoenable/disablethebulkcompressionforthedatatrafcbetweenthe
server and client.
Connection Settings
Item Description
USB Storage Mapping
Click the drop-down menu to enable/disable USB storage mapping.
When Enable is selected, users can access the local USB storage devices, such
asaUSBashdriveandmemorycardreader,inaRemoteDesktopsession.
NOTE: ViewSonic Client Setup also allows you to enable or disable the use of
locally attached USB storage devices. You need to enable locally attached
USBstoragedevicesrstinordertousetheminaRemoteDesktop
session. The default is enabled.
NOTE:ToconguretheuseofUSBstoragedevices,pleaserefertosection
“4.4.3ConguringSettingsforUSBStorageDevices”onpage68.
Printer Mapping
Click the drop-down menu to enable/disable printer mapping.
When Enable is selected, users can access a local or network printer in a
Remote Desktop session.
NOTE:YouneedtoaddalocalornetworkprinterforyourSC-T35rst,andthen
enable this feature here to use that printer in a Remote Desktop session.
NOTE: For detailed instructions on how to add a local or network printer for your
SC-T35, please refer to section “4.4.6 Adding a Local Printer” on page
71 or “4.4.7 Adding a Network Printer” on page 74.