VIKING TECHNICAL SUPPORT 1.800.908.0884
10
SPECIFICATIONS
SPECIFICATIONS
Max Gate Length 60 Feet Main Power Frequency 50Hz / 60Hz
Max Gate Weight 1600 lbs Main Power Fuse 4.0A Timed
UL 325 Classication Class I, II, III, IV *refer to page 5 Alternative Power 24VAC/VDC (60VA) or Solar
Duty Cycle 100% Accessory Power 24VDC (750mA)
Operating Voltage 24VDC Power Consumption 75mA
Main Power Source 120VAC / 240VAC Single Phase Motor Current Draw - Typical 6.0A
Main Power Current 3.0A / 1.5A Operating Temperature -20°F (-28°C) to 160°F (71°C)
1.
OPERATOR COVER
2.
COVER LOCK
3.
ACCESS DOOR
external access to the Manual Release
Switch and Alarm Reset Button
4.
BATTERY BACKUP SYSTEM
5.
VFLEX CONTROL BOARD
6.
BATTERY SWITCH
disconnects batteries from the charging
circuit during troubleshooting
7.
EPS (ELECTRONIC POSITIONING SENSOR)
redundant sensor for the digital limits
8.
MOTOR
9.
LOOP RACK
for convenient loop detector installation
10.
GEARBOX
11.
SPS (SMART POSITION SENSOR)
main sensor for the digital limits
12.
MANUAL RELEASE/MOTOR SWITCH
discontinues power to the motor and
allows for manual operation of the gate
13.
ALARM RESET BUTTON
resets the operators alarm
14.
POST MOUNTING U-BOLT HOLES
for optional post mount installation
15.
J-BOX
high voltage power supply connection
16.
EMI FUSE
main power supply protection
17.
MODULAR POWER BOX
removable; provides a convenient solution
for optional low voltage installations
To Next Page
Loading...
