THE VIKING L-3™ SLIDE GATE OPERATOR
• Externally accessible Manual Release Switch
• Plated and powder coated steel chassis
• Adjustable travel speed
• Up to 60’ maximum gate opening
• 100% duty cycle
• Modular Power Supply Box for convenient
low voltage installations
• 100 cycles of operation on backup battery
(1000 lb. gate and 20’ length)
• Intelligent speed control with smooth start
and stop, self-adjust system
• Anti-Tailgate and Operation Pre-Warming
features
• NEW: Smart Position Sensor tracks the exact
gate position during power outages and
when the gate is moved manually
• Hold Open Timer to automatically close
the gate
• Intelligent obstruction detection with
adjustable sensitivity
• Modular connectors for easy access control
and accessory installation
• Regulated power supply for your external
accessories
• LED indicators display gate and operator
status for easy troubleshooting
• On-Board LCD Display provides diagnostics,
operator status, settings and real-time volt
and amp readings
• Built-in motor heater for cold weather
applications
• Equipped for 115/230 VAC, 24 VAC/VDC and
Solar power supplies
STANDARD FEATURES
AND OPERATOR SPECIFICATIONS
To Next Page
Loading...
