© 2010 Viking Preferred Service
20
Operation
Height Adjustment
Removal of the kickplate allows access to rollers
and stabilizing legs for height adjustment.
1. Remove lower kickplate screws using a Phillips
screwdriver.
2. Remove upper kickplate screws using a Phillips
screwdriver. Remove kickplate assembly.
3. Using a 5/16” head wrench, turn the front (F)
adjustment screws to raise or lower the front of
the refrigerator.
Note: DO NOT use an electric device.
Overtightening can cause damage.
4. Using a 5/16” head wrench, turn the rear (R)
adjustment screws to raise or lower the rear of
the refrigerator.
Note: DO NOT use an electric device.
Overtightening can cause damage.
5. Reinstall kickplate.
2
To Next Page
Loading...
