Vimar radioclima User Manual

28 - ENGLISH
15. GLOSSARY
Internal Communication Interface
Device used for connecting the GSM Communicator to the
Radioclima control system.
Network address
Numeric value which the system automatically assigns to each
radio relay actuator or internal communication interface configured
in the system.
Logical address
Numeric value which the system automatically assigns to each
thermostat configured in the system. The primary thermostat is
assigned the logical value 001 by default.
Multi-zone installation
Installation characterised by a number of separate temperature
measurement/control areas.
RSSI
Received Signal Straight Indication: communication signal level
between the Radio Base and the peripheral devices.

Vimar radioclima Specifications

General

Brand	Vimar
Model	radioclima
Category	Thermostat
Language	English