EXPLORE THE BIKE'S FEATURES
20
+ Adjusting Stiffness: Rotate cap A clockwise to increase the stiffness of the
absorber and rotate counterclockwise to decrease the stiffness. The stiffness level of
the absorber depends on the position of cap A set by the user.
A
+ Adjusting the rebound speed: Loosen the screw B to adjust the rebound speed as
desired. Screw B can be loosened up to a maximum of 3 turns but cannot be
completely removed from the shock absorber.
B
+ Inflating the shock absorber with air: Remove the cap C by turning it
counterclockwise. Then, add air to the shock absorber through valve head D.
The air pressure should be adjusted according to the rider's weight, typically
around 110-130 psi.
C
D
To Next Page
Loading...