VINFAST DRGNFLY - Lithium-ion Battery; Chainring

PERIODIC MAINTENANCE AND
ADJUSTMENTS
51
Service and Maintenance Schedule for Front shock adsorber
Contents Each ride Every 50
Hours
Every 100
Hours
Check sag and fork extension, reset air pressure in both chambers. Every 5
Rides
Cleasn and inspect fork exterior, including travel indicating o-ring. Clean with mild
soap water.
x
Inspect stanchions for scratches, dents or other demage. x
Inspect and clean air valve threads to prevent dirt from entering air spring during
inflation.
x
Inspect headset preload, brake caliper connection torque and axle tension. Every 5
Rides
Remove lowers, clean and inspect bushings and seals, change oil bath. x
Full fork air spring and damper rebuild performed by VinFast’s Distributors and
Service workshops.
x
6.2.14. Lithium-ion Battery
During the use of the bike, driving on rough road conditions can impact the Lithium-ion battery and the condition of the Lithium-ion
battery connections may change. Therefore, the Lithium-ion battery needs to be periodically inspected for external condition and the
assembly condition of the Lithium-ion battery connections.
6.2.15. Chainring
The chain must be regularly inspected and lubricated. Inspect the chain more frequently when driving on rough roads, driving at high
speeds, or during continuous acceleration.