54
TROUBLESHOOTING
Error code list
Error code Description Error code Description
01 Abnormal phase current 31 Reference voltage error
02 Abnormal bus current 36 Torque voltage error
03 HALL error 37 Speed sensor error
04 Brake or throttle error 38 Temperature error
05 Controller temperature error 40 Current feedback error
06 Motor temperature error 41 Drive voltage error
08 Controller communication error 42 Abnormal current
09 Low or high voltage 43 Motor phase error
20 WALK button and power button error 50 Torque voltage detect circuit error
30 Communication error 60 Display MCU error, reference voltage error
7.2.
Turn the throttle and the bike won't run
Check the error code displayed on the HMI.
Ensure that the charger has been disconnected from the vehicle.
7.3.
Unable to Start the Bike
Turn on the bike, but no response:
Turn off and then turn on the battery switch, then try starting again. If unsuccessful, please contact technical support.
To Next Page
Loading...