EasyManua.ls Logo

VINFAST DRGNFLY - Check and Lubricate Side Stand; Headset Cup Check

Default Icon
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PERIODIC MAINTENANCE AND ADJUSTMENTS
50
6.2.12.
Check and lubricate the side stand
The operation of the side stand must be checked every time you
operate the bike. The pivot points (A) and contact surfaces
should be lubricated if necessary.
WARNING!
If the side stand does not fold up or down smoothly, please bring the vehicle to the Distributors and Service workshops of VinFast
for inspection and repair. If the side stand does not fold up while driving, it can lead to a loss of control and accidents.
Recommended lubricant: Grease
6.2.13.
Headset cup check
If the bearing set or headset cup is worn or loose, it can be dangerous. Therefore, the operation of the headset cup must be checked
regularly according to the maintenance schedule and lubricated as prescribed.
Inspection procedure:
+ Securely place the bike using specialized equipment. Make sure to
keep the bike secure to prevent any dangers from the bike falling over.
+ Use both hands to grip the lower end of the suspension fork, and rock
it back and forth. If you feel any looseness, take the vehicle to the
Distributors and Service workshops of VinFast for inspection and repair.
A

Table of Contents