STARTUP AND OPERATION
38
Kiểm
t ra
Mở khóa
hệ t hốn g đi
Vận hành
xe đ iện của bạn
Turn ON the bike
Operating your electric
5.2. Pre-operation check
The basic operations when operating your electric bike briefly described in the diagram below. Please proceed to the detailed
instructions for each part as per the guide to learn more details.
Before operating your electric bike, please pay attention to check the following points:
Lithium-ion battery: Check the battery capacity to ensure there is enough energy for your upcoming journey.
Brakes: Squeeze the brake lever and test pushing the vehicle forward and backward to check the brake responsiveness. Ensure that
the brakes are functioning properly.
Electric throttle: Turn off the HMI, try pushing down and releasing the electric throttle to check for smooth operation and its return
to the original position.
Tires: Check the tire pressure and wear on both tires to ensure safety.
Electrical system: Check the functioning of the front lights, HMI display, and rear lights.
5.1. Basic operation
5. Startup and Operation
To Next Page
Loading...