EXPLORE THE BIKE'S FEATURES
19
4.8.
Battery switch
The battery switch (A) is located beneath the battery block.
Press the switch once to turn on the battery.
Press and hold the battery switch for about 3 seconds (s) until
the LED light flashes to turn off the battery.
Next to the switch, there is an LED indicator bar to display the
remaining battery power. Each battery bar represents 20%
capacity. When the battery capacity is less than 5%, the LED light
will flash red.
⚠ WARNING!
Always turn off the battery when installing or removing it from the bike.
4.9.
Front lights and rear lights
The vehicle is equipped with front lighting, including position lights and low-beam headlights. The rear lights include rear position
lights and brake lights. The lighting system is designed to automatically turn on/off when you turn on/off the vehicle's electrical
system and the light icon is always illuminated on the HMI.
Note: The front light housing temperature will increase during operation. Avoid touching the metal headlight housing directly during
and after the headlight operation.
4.10.
Front shock absorber setting
The front shock absorber is an air shock absorber system, which allows users to manually adjust parameters such as stiffness, rebound
speed, and compression speed to achieve the most comfortable riding experience.
To Next Page
Loading...