VINFAST DRGNFLY - Turn ON the Bike; Turn OFF the Bike; First-Time Operation; Walking Mode

39
STARTUP AND OPERATION
5.3. Turn on/off the bike's electrical system
5.3.1. Turn ON the bike
Note: The battery will automatically power off after a period of inactivity. Press the power button on the battery to turn it on
before use.
The vehicle is in the OFF state. Press the power button on the HMI once to activate the vehicle's electrical system.
5.3.2. Turn off the bike
While the bike is in the ON state, press and hold the power button on the HMI to turn off the bike.
5.4. Operating Your Electric Bike
5.4.1. First-Time Operation
1. Raise the side stand.
2. Turn on the bike.
3. Set the desired assistance modes.
4. Gradually use the electric throttle or pedal to accelerate the bike.
5.4.2. Walking Mode
Electric bikes are designed to be heavier than regular bicycles. Therefore, your bike is equipped with a walking mode to assist the
rider when walking the bike.
Press and hold button on the HMI screen to activate walking mode. The bike's speed will be limited to a range of 3-6 km/h.
Release the button to turn off walking mode.