VINFAST DRGNFLY - Spokes Check; Check Wheel Bearings

PERIODIC MAINTENANCE AND
ADJUSTMENTS
49
6.2.10. Spokes check
 Loose spokes:
+ Signs: The wheel is more wobbly than usual.
+ Inspection method: Check by rotating the wheel and observing the runout (when spokes are loose, the wheel's runout radial will
increase) or use a spoke tension gauge.
+ Solution: Bring the vehicle to the Distributors and Service workshops of VinFast to tighten the loose spokes and check the rim
runout.
 Broken or cracked spokes at the hub:
+ Signs: The wheel may face runout when the spoke tip is broken.
+ Inspection method: Observe the appearance at the hub-end of the spoke.
+ Solution: Bring the vehicle to Distributors and Service workshops of VinFast for spoke replacement
6.2.11. Check the wheel bearings
The front and rear wheel bearings must be checked regularly
according to the maintenance schedule and lubricated as
required. If you notice loose or rough hub, or if the wheels do
not spin smoothly, please bring the vehicle to Distributors and
Service workshops of VinFast for bearing inspection