VINFAST DRGNFLY - Checking Brake Lever Wear; Brake Light Switch; Lights;Bells;Switches;HMI Screen; Front Shock Absorber Check

PERIODIC MAINTENANCE AND ADJUSTMENTS
45
6.2.3. Checking Brake Lever Wear
Applies to both left and right brake levers. When squeezing the
brakes, there should not be any free play at the end of the brake
lever. If this occurs, please contact the Distributors and Service
workshops of VinFast for a brake system inspection.
⚠ WARNING!
An unusual soft feeling when squeezing the brake is a sign of air entering the brake fluid. In this case, you must bring the
vehicle to
the Distributors and Service workshops of VinFast for inspection and bleeding of the brake system before use. Air in the brake flu
id
reduces brake performance and can lead to loss of control and accidents.
6.2.4. Brake Light Switch
The brake light is usually activated when the brake is applied, so it should illuminate before the brake takes effect. If the brake light
does not come on when the brake is applied, you should bring it to the Distributors and Service workshops of VinFast.
6.2.5. Lights/Bells/Switches/HMI Screen
Check the basic functionality of the lighting system, bells, switches, and HMI according to the maintenance schedule.
6.2.6. Front Shock Absorber Check
The operation status of the front shock absorber should be regularly inspected as specified in the periodic maintenance schedule.