PERIODIC MAINTENANCE AND ADJUSTMENTS
46
Status Check:
Inspect the shock absorber tube surface for any damage or oil leakage.
Check the air pressure to see if it meets the standard and add air if necessary.
Operation Check:
Park the bike on a flat surface and keep it upright. Ensure that the bike is
securely held to prevent any danger of it tipping over.
While squeezing the front brake, bounce the front suspension up and down a
few times to check if the shock absorber operates and rebounds to the desired
setting. If not, proceed to readjust the shock absorber.
NOTE: If you detect any damage or any abnormal operation of the front shock absorber, please visit the Distributors and Service
workshops of VinFast to check.
6.2.7.
Front and rear wheel axle
⚠ WARNING!
Securely hold it to prevent the risk of the bike falling over.
Check the standard tightening force:
-
Front axle bolt: 28 - 35 Nm.
-
Rear axle bolt: 35 - 50 Nm.
To Next Page
Loading...