56
VEHICLE CARE AND PRESERVATION
If there are matte-painted details on the bike, avoid letting the rust-preventive oil adhere to those details.
NOTICE:
Do not spray directly into areas with rubber gaskets, such as motor shaft seals and front wheel shafts.
Do not use high-pressure water hoses to wash the bike
Dry the brakes after washing the bike.
Do not spray water directly under the saddle.
Do not spray water directly around the front lights, rear lights, HMI screen, throttle, and battery lock.
Do not apply rust-preventive oil or polishing oil to matte-painted surfaces.
Turn off the battery before washing the bike.
To Next Page
Loading...