Vinten flowtech 75 - Accessories; Fit Supplied Attachment Mount


Installation
Close Tripod Legs
1. The legs may be closed with or without the Lock being engaged.
2. Ensure the tripod legs are fully collapsed before moving them
inward.
!
WARNING! Risk of nger entrapment. Avoid trapping

3. Ensure the magnetic clasps have engaged and the legs are
securely held.
The tripod is designed to accommodate the Mid-Level
Spreader when collapsed.
Fit Supplied Attachment Mount
1. There are three accessory docks. These can be used to dock the
supplied attachment mount, Variable Friction Arm etc..
2. 󰀨
3. 

4. Follow the same procedure to attach optional accessories to the
remaining mounting points if required.


Accessories