Vinten flowtech 75 - Fit Optional Carry Strap


Accessories
Fit Optional Carry Strap
1. Fit the attachment mount as previous section: “Fit Supplied
Attachment Mount”.
2. Fit the split ring to the mounting point at the bottom of the upper
section.
3. Attach the strap clasps to the mounting points.
Attach Optional Rubber Feet
1. 

face outwards.
1
2
2. Bend the rubber strap
1
and engage the bottom edge of the
lever in the tripod recess.
3. Lift the lever
2
upwards towards the tripod until it locks in place.