• Voice Command:
Voice recognition commands. You can issue different voice
commands to remote control the camera, including:
• GPS:
Turn on / off GPS logger. A GPS module is used to include the
location data in the recorded videos. If disabled, your camera will
no longer measure your speed and position; nor synchronize the
time / date. (Only available when connecting with GPS signal)
Please use “Dashcam Viewer” to playback videos and to visualize
your position and speed on your computer.
• Speed Unit:
Kilometer per hour (KMH) and miles per hour (MPH) are available for
speed unit.
• Voice Control: Turn off / on the voice control.
When Voice Control is turned on, you can control the camera with
spoken commands, using your voice to take photos, turn on/off
WiFi, start recording, and more.
Note:
Voice command language should be consistent with dashcam
system language in following four options: English, Chinese, Russian,
Japanese. For all other dashcam language systems, English is the only
language to trigger voice control function.
- Take Photo
- Video Start
- Lock the Video
- Turn On Audio
- Turn Off Audio
- Turn On WiFi
- Turn Off WiFi
22
• Reset Camera Settings:
Reset all settings to default values.
• Wi-Fi Name (SSID):
Change Wi-Fi name.
• Wi-Fi Password:
Change Wi-Fi Password. Wi-Fi default password is 12345678.
• Custom Text Stamp:
Imprint the custom text on the recorded video.
• Car License Number:
Imprint the car number on the recorded video.
• Free Space on Card:
Show theremaining storage space on the microSD card.
• GPS Info Stamp:
Imprint the GPS information on the recorded video.
• Camera Model Stamp:
Imprint the camera model on the recorded video.
• Frequency:
Set it to minimize flickering and banding in the recorded video.
• Format SD Card:
The operation will delete all data on the MicroSD card. Note: Once
you format the card, all information will be deleted and
unrecoverable. Make sure you back up all files that you need
before formatting.
23
To Next Page
Loading...
