Manual BG41/BG42/BG43 Software
Rev. 99/49 4-101
Instruction 05: Date and time are to be transferred to the PLC as ASCII code.
(20 bytes, after 2 acknowledgement bytes)
Fig. 4-31: Operating of the clock, command 4, instruction 05
After the two acknowledgement bytes, the following character string, for example, is transferred to
the PLC:
Tuesday 06.06.1995 14:53:00
The character string is received through the data channel of channel 0. Including the two
acknowledgement bytes, 22 bytes altogether are transferred.
To Next Page
Loading...
