Functional description and allocation of terminal pins Manual BG41/BG42/BG43
3-30 Rev. 99/49
3.2.7.9 Application of the SSI-module without data handling blocks
3.2.7.10 Parameter channel
Further information for the application of the interface without Data Handling Blocks can be found
in chapter 4.2.
Select the SSI function for the corresponding interface channel via the parameter channel with the
command 5.
Fig. 3-29: Function selection SSI with command 5
3.2.7.11 Commands for the data channel
Use the data channel for handing over the commands.
Command overview
1 Reading of an SSI value 1 byte command
3 Setting of the mode 2 byte command
To Next Page
Loading...
