Viper 5000 User Manual

44
© 2005 directed electronics, inc.
of the transmitter several times within range of the vehicle.
The alarm will automatically re-sync and respond to the trans-
mitters normally.
hhiigghh ffrreeqquueennccyy
Your system transmits and receives at 434 MHz. This provides a
cleaner spectrum with less interference and a more stable signal.
Enjoy a phenomenal increase in range – even in areas with high
radio interference.
oowwnneerr rreeccooggnniittiioonn
Owner Recognition is a feature available exclusively from Directed.
Using the Directed Bitwriter
®
, a hand-held programming tool,
your dealer can program many of the system settings. The
programmer makes it possible to program different settings for
each transmitter that is used with the system. Then, whenever a
specific transmitter is used, the system will recall the settings
assigned to that transmitter. Owner Recognition lets up to four
users of the system have different settings that meet their specific
needs. It is almost like having four separate alarms in your vehicle,
one for each user.

Viper 5000 Specifications

General

Category	Car Alarm
Remote Start	Yes
Two-Way Communication	Yes
Keyless Entry	Yes
System Type	2-Way Security and Remote Start System
Number of Buttons on Remotes	5
Number of Remotes Included	2
LCD Display	Yes
Starter Kill	Yes
Door Lock Control	Yes
Trunk Release	Yes
Panic Mode	Yes
Valet Mode	Yes
Range	1 mile
Shock Sensor	Yes
Siren	Yes
Remote Control	Yes
Compatibility	Universal