EasyManuals Logo

Viper 5000 User Manual

Viper 5000
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
39
© 2005 directed electronics, inc.
Exit Shock Sensor Adjustment Mode:
The adjustment mode will be exited if:
No input from transmitter for 15-seconds.
No input from sensitivity testing for 15-seconds.
The ignition is turned On.
The Valet button is pressed.
The siren and LCD remote will emit 1 long beep and the LED
will extinguish when shock adjustment mode is exited.
Reset Shock Sensor to Default Setting:
The shock sensor can be restored to a default setting of 10 to
facilitate re-adjustment at any time
wwhhiillee iinn
adjustment mode.
1. Simultaneously press the and buttons.
2. The LCD remote will emit 3 quick beeps to indicate the
sensor has been reset to level 10 (mid-range).
3. The system returns to shock sensor adjustment mode for
further adjustment, if required.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Viper 5000 and is the answer not in the manual?

Viper 5000 Specifications

General IconGeneral
CategoryCar Alarm
Remote StartYes
Two-Way CommunicationYes
Keyless EntryYes
System Type2-Way Security and Remote Start System
Number of Buttons on Remotes5
Number of Remotes Included2
LCD DisplayYes
Starter KillYes
Door Lock ControlYes
Trunk ReleaseYes
Panic ModeYes
Valet ModeYes
Range1 mile
Shock SensorYes
SirenYes
Remote ControlYes
CompatibilityUniversal

Related product manuals