Viper 5000 User Manual

59
© 2005 directed electronics, inc.
"chirps" you hear, as well as the six tones you hear while the
alarm is triggered.
Transmitter : Hand-held, remote control which operates the
various functions of your system.
Trigger or Triggered Sequence: This is what happens when the
alarm "goes off" or "trips". The triggered response of your
system consists of the siren sounding and parking light flashing
for the programmed duration.
Valet Button : A small push-button switch mounted somewhere
inside the vehicle. It is used to override the alarm when a trans-
mitter is lost or damaged, or to enter or exit Valet mode.
Warn Away
®
Response: Lighter impacts to the vehicle will generate
the Warning Zone response. It consists of several seconds of siren
chirps and parking light flashes.
Zone : A zone is a separate input that the alarm can recognize as
unique. Each input to the system is connected to a particular
zone. Two or more inputs often share the same zone.

Viper 5000 Specifications

General

Category	Car Alarm
Remote Start	Yes
Two-Way Communication	Yes
Keyless Entry	Yes
System Type	2-Way Security and Remote Start System
Number of Buttons on Remotes	5
Number of Remotes Included	2
LCD Display	Yes
Starter Kill	Yes
Door Lock Control	Yes
Trunk Release	Yes
Panic Mode	Yes
Valet Mode	Yes
Range	1 mile
Shock Sensor	Yes
Siren	Yes
Remote Control	Yes
Compatibility	Universal