Chapter 2 - Installation 13
Chapter 2 - Installation
Software Installation
The VISION installation program guides you step-by-step. All the information you need
appears on the screen as you install the program. Read each screen carefully and follow
all prompts. If you make an error in the installation, do not panic. All setup information
can be changed later from within VISION.
While running Windows, insert the VISION CD-ROM into the CD drive. If your CD-ROM
drive has the auto start feature enabled, the Vision Installation will start automatically. If
the auto start is not enabled, then you will need to do the following:
Select Start… Run… from the toolbar on the Windows desktop.
To Next Page
Loading...
Need help?
General
