Chapter 4 - Optional Accessories 49
(Figure 4.8) The Versa Vise with Seal jig
Designed for notary seals of
all diameters. Rotating the
jaw 180º will allow clamping
of both large and small
sizes.
(Figure 4.9) The Universal Pin Jig
Vacuum Chip Removal System
The optional vacuum chip removal system is designed to simplify the engraving process
and minimize wear and tear on the engraver. The vacuum chip removal system uses a
This is a true universal
clamp designed for holding
odd shaped items such as
state badges, hearts, and
medallions with unusual
borders, pet tags, jewelry
and more. The dowel pins
may be moved anywhere on
the jaw to accommodate
any odd shape.
To Next Page
Loading...
