Vision VE-810 User Manual

24 VE810 Engraver Manual
15. Select the Start menu in the lower left corner of the screen. Right mouse click on
My Computer and select Manage.
16. The following screen will appear. Select “Device Manager” on the left side.
17. Double click on “Ports (COM & LPT)” on the right side.
18. Double click on “USB Serial Port (Com3)”. Note: The com number shown may be
different then 3.

Vision VE-810 Specifications

General

Brand	Vision
Model	VE-810
Category	Engraver
Language	English