Chapter 6 - Troubleshooting 67
roblem: Spindle is hot.
ossible solutions:
ne area is free of debris. Check the vacuum system (if used) for
dle bearings may need to be replaced.
ossible solutions:
.
ossible solutions:
eplaced. See Chapter 5 - Changing the motor belt
P
P
1. Ensure that the nose co
clogging.
2. Inspect the spindle for other obstructions that may prevent proper rotation.
3. The spin
Problem: Spindle motor will not come on.
P
2. Check motor brushes. See chapter 5.
Problem: Motor belt will not stay on pulley
P
1. Motor belt is probably worn and needs to be r
To Next Page
Loading...
