Visionix VX36 - Under View; Installation Procedures; Site Requirements; Unpacking the Unit

Vx36 User manuel Page | 11
Under View
No
Description
1
Ethernet Port ( only for technician)
2
Mini Usb port ( only for technician)
3
Power inlet
4
Serial port (RS-232)
Connects a compatible optometric device, such as phoropter, to the unit.
Connects a computer for data collection to the EMR software.
3.3 Installation Procedures
Site Requirements
The VX36 unit should be placed on a clear table or desktop close to a power outlet, in a
clean environment, clear from dust, heavy humidity and light.
Unpacking the unit
• Open the carton with care.
• Remove all accessories listed in the packing list from the protective top cover
• Lift the protective top cover to uncover the vx36 unit
Important
Do not grab or hold the screen when you extracting the device from the box.
• Take the vx36 out of the box and put it on the table.
• Remove the blocking foam by moving up the blocker
1
3
3
4
3
3
3
3
3
2
3
3