Visionix VX36 - Conformity to International Directives and Standards; EMC Electromagnetic Compatibility

Vx36 User manuel Page | 48
Sphere measurement range
-25.00 D to +25.00 D
Cylinder measurement range
0 to +/- 10 D
Cylinder axis measurement range
0° to 180°
ADD measurement range
+10 D
Prism measurement range
0 Δ to 20 Δ
Measurable lens diameter
10 mm to 90mm
Axis accuracy
+/- 5°
PD measurement range
42 mm to 82mm
PH measurement range
8mm to 45mm
Observation measurement
UV transmittance
Vertex power measure wave length
525 nm
UV-A measure wave length
365 nm
9.2 Conformity to International Directives and Standards
The vx36 complies with the following Directives:
EMC Directive : 2014/30/EU
Low Voltage Directive : 2014/35/EU
ROHS2 Directive: 2011/65/EU
• Lifetime of the product: 7 years
• Date of first CE marking 11/2017
9.3 EMC Electromagnetic compatibility
The vx36 is intended for use in the electromagnetic environment specified below. The customer or the user of
the VX36 should assure that is used in such an environment
Emission test
Compliance
Electromagnetic environment – guidance
RF emissions EN61000-6-
3
Group1
The VX36 uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not
likely to cause any interference in nearby electronic
equipment.
RF emissions EN61000-6-
3
Class B
The VX36 is suitable for use in all establishments
including domestic and those directly connected to the