Visionix VX36 - Ruler Mode

Vx36 User manuel Page | 20
4.5 Ruler Mode
This mode allows you to measure the PD and height of the lenses of the spectacles.
N°
Description
1
Button to move the left cursor (13) in the left direction
2
Button to move the left cursor (13) in the right direction
3
Button to move the left cursor (13) in the top direction
4
Button to move the left cursor (13) in the down direction
5
Button to move both cursors (13&15) and the rulers on the sides in the top direction.
To use when the border of the spectacles is thick.
6
Button to move both cursors (13&15) and the rulers on the sides in the bottom direction.
7
Button to move the right cursor (15) in the left direction
8
Button to move the right cursor (15) in the right direction
9
Button to move the right cursor (15) in the top direction
10
Button to move the right cursor (15) in the down direction
11
Values of PD (PD for left lens, total PD and PD for right lens) according to the positions of the
cursors (13&15)
12
Values of height (height for left lens, delta of height right/left and height for right lens)
according to the positions of the cursors (13&15)
13
Cursors to determine the central position of left lens
14
Nose indication to help to center properly the spectacles
1
3
3
2
3
3
3
3
3
4
3
3
5
3
3
6
3
3
7
3
3
8
3
3
9
3
3
10
0
3
3
11
0
3
3
12
0
3
3
13
0
3
3
14
0
3
3
15
0
3
3