Visionix VX36 - Diameter Mode

Vx36 User manuel Page | 22
4.6 Diameter Mode
This mode allows you to measure the needed lens diameter of each lens of the spectacles.
N°
Description
1
Button to move the selected (right or left side) cursor (9) in the left direction.
2
Button to move the selected (right or left side) cursor (9) in the right direction
3
Button to move the selected (right or left side) cursor (9) in the top direction
4
Button to move the selected (right or left side) cursor (9) in the down direction
5
Selection of the left lens. Only the cursors and circles of the left lens will be displayed.
6
Selection of the right lens. Only the cursors and circles of the right lens will be displayed.
7
Values of PD for the selected (right or left side) cursor
8
Values of height for the selected (right or left side) cursor
9
Cursor in the center of concentric circles of 55-66-75mm for the blue circles and 60-70 mm for
the black circles.
10
Nose indication to help to center properly the spectacles
1
3
3
2
3
3
3
3
3
4
3
3
5
3
3
6
3
3
8
3
3
9
10
7
3
3