Vx36 User manuel Page | 45
8.5 Replacing the Self Inking Pens (EU version)
The tree marking pens are self-contained cartridges. When the ink is low, the self inking pens need to be
replaced by new ones.
1.Unscrew the screws at the top of the pen. Remove the screws, springs and dotting pens, as show below:
2.Insert the spring and new pen into the pen holder and tighten the screws as shown below:
Touching the Tip may result in damage to the tip of the pen and the dots marked on the lens may not be
accurate
CAUTION: Fastening the screw too tightly may result in damage to the ink cartridge.
To Next Page
Loading...