VX90 - User Manual
9
II.3 - Precautions During Use
Important!
- Do not place or use the VX90 in direct sunlight.
- Do not expose the VX90 to excessive dust or humidity.
- Do not place the VX90 in a hot air current (e.g. above a heater).
- Do not obstruct the ventilation vents.
- Never place the VX90 close to the following types of equipment which can perturb the
reception of commands from the remote control:
- Halogen lamp (direct or indirect)
- Fluocompact lamp
- Equipment emitting infrared radiation (auto-phoropter, automatic tonometer, etc.)
- Keep the screen surface clean. Protect it from dust, fingerprints, and shocks.
- When you switch off the VX90, wait at least 5 seconds before switching it on again.
II.4 - Symbols
Symbol Descripion
Important: consult the documents supplied with the equipment
Type B applied parts
The equipment must be returned to the manufacturer for scrapping
(see Waste Electrical and Electronic Equipment (WEEE) Directive)
Manufacturer
Year of Manufacturing
Serial Number
0051
Compliance with Medical Device Directive 93/42/EC amended by
Directive 2007/47/CE
0051 : identification number of Notified Body IMQ (I)
Rx only
Caution: Federal (U.S.) Law restricts this device to sale by or on the
order of a physician.
To Next Page
Loading...
