VisionQuest HDTV - 2-Using the Antenna or Cable through Your VCR

2.5.2- Using the Antenna or Cable through Your VCR
1.Turn off the power to your LCD TV and VCR .
2.Connect the "Output to TV" (RF Out or Antenna Out) connector on the rear of your VCR to the TV CABLE/
AIR connector in the rear of your LCD TV.
3.Turn on the power to your LCD TV and VCR.
4.Select TV using the INPUT button on the remote control or front of your LCD TV or directly by pressing the
TV button on the Remote Control.
Note: If you have an off-air antenna or cable TV, connect the off-air antenna or TV cable to the RF
connector on the rear of your VCR.
WWW.VISIONQUESTCE.COM
27
VIDEO EQUIPMENT
with terminal
AUDIO
IN
R-1
L-1
L-3
Pr/Cr-1Pb/Cb-1
Y-1
AV1
AUDIO
IN
DIGITAL HD
L-5
R-5
VGA IN
HDMI2-IN HDMI1-IN
S-VIDEO IN
VIDEO IN
AUDIO IN
R-3
R-4L-4Pr/Cr-2Pb/Cb-2Y-2
AUDIO IN
AC IN
DIGITAL
AUDIO OUT
75Ù ANT.
SERVICE