VisionQuest HDTV - Connecting a Computer

2.7 - Connecting a Computer
1.Turn off the power to the LCD TV and Computer.
2.Connect a 15-pin D-sub VGA cable to the VGA output of your computer and the other end to the VGA
input in the rear of your LCD TV.
3.Connect the Audio Out on your computer to the VGA Audio IN in the rear of your LCD TV.
4.Turn on the power to your LCD TV and computer.
5.Select VGA using the INPUT button on the front of the LCD TV or directly by pressing the VGA button on
the Remote Control.
WWW.VISIONQUESTCE.COM
29
W R
AUDIO
IN
R-1
L-1
L-3
Pr/Cr-1Pb/Cb-1
Y-1
AV1
AUDIO
IN
DIGITAL HD
L-5
R-5
VGA IN
HDMI2-IN HDMI1-IN
S-VIDEO IN
VIDEO IN
AUDIO IN
R-3
R-4L-4Pr/Cr-2Pb/Cb-2Y-2
AUDIO IN
AC IN
DIGITAL
AUDIO OUT
75Ù ANT.
SERVICE