EasyManua.ls Logo

VisionQuest HDTV - Page 4

VisionQuest HDTV
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTALLATION
CAUTION
Thank you very much for purchasing this TV. To enjoy your set to the finest from the very beginning, read this manual
carefully and keep it handy for future reference.
Never tamper with any components inside the TV, or any other adjustment controls not mentioned in this manual. All
LCD-TVs are high voltage instruments. When you clean up dust or water drops on the LCD PANEL or CABINET, the
power cord should be pulled out from the receptacle, then wipe the receiver with dried soft cloth. During thunder and
lighting, unplug the power cord and antenna cord to prevent damage to your TV. All repairs to this TV should only be
performed by the TV service personnel.
PREFACE
Position the TV in the room where light does not strike the screen .
Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended
for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid excessive warm locations to prevent possible damage to the cabinet or premature component failure.
This AC power can be connected to AC 100-240 volts. 50/60Hz.
Do not cover the ventilation openings when using the TV.
directly
4
WWW.VISIONQUESTCE.COM

Table of Contents