Visonic KP-250 PG2 - Page 23

6. System Configuration
D-304269 KP-250 PG2 User’s Guide 23
A. To Bypass a Zone
1.
SET ZONE BYPASS
Enter the [USER SETTINGS] menu
1
, select the [SET ZONE BYPASS]
2
option and
press .
Z01: READY
Living Room
The first zone, Z01, is displayed.
3
Z01: P1

P2 P3
4
2.
or
Click the or button until the display reads the zone you wish to
bypass (or clear bypass), for example, "Z04" for Zone 04. After several seconds
the LEDs on the respective device starts flashing indicating "it's me".
Z04: NOT READY
Z04: P1

P2 P3
3.
Kitchen
When the display reads the zone you wish to bypass press .
4.
<OK> TO BYPASS
The display now reads [<OK> TO BYPASS].
5
To bypass the selected zone press
Z04:BYPASSED
A "Happy Tune"  ☺ sounds and the updated zone status is now displayed i.e.
[ Z04: BYPASSED ].
8
B. To Clear a Bypassed Zone
5.
Z04: BYPASSED
Z04: P1

P2 P3
Repeat steps 1 to 2 above.
4
6.
Kitchen
When the zone you wish to clear bypass appears on the display (for example,
"Z04"), press to confirm. You can also identify the device by looking for the
"it's me" LED indication on the displayed device.
<OFF> TO CLEAR
The display now reads [<OFF> TO CLEAR].
5
7.
To clear the bypassed zone, press the button.
Z04:READY
A "Happy Tune"  ☺ sounds and the updated zone status is now displayed, i.e.
[ Z04: READY ] or [ Z04: NOT READY ].
9