Page.4.
and call camera OSD menu
AHD camera image display, zoom, video record and playback, Coaxial PTZ control and
call camera OSD menu
HDMI signal output, supports up to 1080P.
Analogueue camera image display, auto adapt and display the video format of
NTSC/PAL
Support more than 30 protocols, such as PELCO-P,PELCO-D,SAMSUNG etc
Video image digital zoom to view the image in greater detail.
Snapshot function allows you to save the current image as a JPG file in the SD card.
LED Flashlight.
4GB Micro SD card included.
LCD screen brightness/contrast/colour Saturation adjustable
Digital Multi-meter , DC and AC voltage measurement, Resistance measurement
Continuity test, Diode measurements, Capacitance measurement
Enhanced Colour bar generator, PAL/NTSC multi-system colour bar video generator
(Eight-system switchable, transmit/receive eight-system colourful images).
PEAK video signal level, SYNC signal level, Colour burst chroma level
measurement,test video signal attenuation
Cable tracer, by sending the audio signal, enables the blue cable tracer tester to find the
connected cable from messy cables.
Ping test, PING is the most conventional network debugging tools; it is used for testing if
the connected IP camera or other network equipment’s Ethernet port is working normally
and the IP address is correct.
In digital IP surveillance applications, if the IP camera’s IP address is not known; the
device cannot be used. An IP address scan can quickly search for the connected IP
camera or other network device’s IP address.
The PoE voltage test can test for PoE voltage when a POE switch is supplying POE
power to an IP camera
To Next Page
