Page.8.
2.3.12 Cable tester
Test LAN cable or telephone cable.
Connect LAN cable or telephone cable with the CCTV tester and cable tester. And then the
connecting status, cable type and the sequence of wires will be displayed, as well as display
the serial number of the cable tester kit.
2.3.13 PTZ data analysis
Search the Control protocol code from Multifunction keyboard or DVR by RS485 /RS232
interface, test the PTZ control command data whether received anomaly and RS485/RS232
data transmission.
Screen displays 16 hexadecimal codes such as
PELCO-P:A0 00（Add） xx xxxxxx AF xx
PELCO-D:FF 01（Add）xx xxxxxxxx
2.3.14 Digital Image zoom on the monitor
Set image zoom up to 4X to get a closer look at all the image detail. Supports analogue and
many IP cameras
2.3.15 Video screenshot, record and playback
Capture the video image displayed and save as a JPEG file. You can also record and save the
current video to the SD card. The recorded files can play directly via Media player or under the
function of “Playback”.
2.3.16 DHCP dynamic address assignment
Built in DHCP server: Dynamically assign IP address for the IP camera or network device.
2.3.17 Access the dynamic IP address
The IP tester can directly access a dynamic IP address assigned from its DHCP server and use
it as the tester’s IP address. No need to set a IP address manually.
2.3.18 Multiple network IP Cameras Test
Supports Multi- segmented Static IP address setting which can simultaneously test different
segments of IP network Cameras.
To Next Page
