Page.88.
player will view photos and playback video
1 channel HDMI output, supports up to 1080p
Output DC12V/2A power to camera
5V 2A power output only ,NO data
48V PoE power output, Max power 24W
1 channel audio signal input and 1 channel audio signal output to
connect headphones
Support RS232/RS485 control, Baud 600-115200bps, Compatible
with more than 30 protocols such as PELCO-D/P, Samsung,
Panasonic, Lilin, Yaan, etc
Output one channel PAL/NTSC colour bar video signal for testing
monitor or video cable.(red, green ,blue, white and black colour )
Test UTP cable connection status and display on the screen. Read
the number on the screen
Captures and analyzes the command data from controlling device,
also can send hexadecimal
IP address scan, link scan, and Ping test. Quickly search the for IP
camera’s IP address on your network
Find a connected cable from a bundle of cables using audio tones
Measures PoE switch voltage and displays pin configuration
AC/DC Voltage, AC/DC current, Resistance, Capacitance, Data hold,
Relative measurement, Continuity testing . Testing speed: 3 times/
seconds, Data range -6600～+6600.
To Next Page
Loading...