Vitrek V4 – Electrical Safety Tester USER MANUAL
37
*IDN? (query only)
Function:
Return the unique identification code of the EST.
Syntax:
*IDN?
<string> includes Manufacturer, model number, serial number and firmware version.
Examples:
*IDN? - returns “s “Vitrek.Inc,V4,0,FW1.23b”
*OPC
Function:
The command form (*OPC) sets the operation complete bit (bit 0) in the Standard Event Status Register
(SESR) when all pending operations are finished.
The query form (*OPC?) tells the V4 to place an ASCII 1 in the Output Queue when the power supply
completes all pending operations.
Syntax:
*OPC
*OPC?
Returns:
1
*RCL
Function:
Recall the setting data from the memory saved previously.
Syntax:
*RCL <NR1>
<NR1> is in the range from 0 through 99.
Examples:
*RCL 12 recalls the setting data stored in memory location 12
*RST (no query form)
Function:
Set all control settings of EST to there default values but does not purge stored setting. The equivalent panel
control will be set as below:
Front Panel Control Default Setting
RESET OFF
Rcall to RAM 0:0 ON (Stop to 0:0)
Syntax:
*RST
To Next Page
Loading...
