Vitrek V4 – Electrical Safety Tester USER MANUAL
3
SAFETY TERMS AND SYMBOLS
These terms may appear in this manual or on the product:
WARNING. Warning statements identify conditions or practices that could result in injury or loss
of life.
CAUTION. Caution statements identify conditions or practices that could result in
damage to this product or other property.
The following symbols may appear in this manual or on the product:
DANGER ATTENTION Protective Ground
High Voltage Refer to Manual Conductor Terminal
Terminal
1. V4 PRODUCT INTRODUCTION
Our goal at Vitrek is 100% customer satisfaction with both our products and our people. Please fill free to
contact us if we can be of help with application or technical assistance, repair or calibration services
accessories or spare parts. Vitrek Corporation
9880A Via Pasar
San Diego, CA 92126 USA
Phone: (858)689-2755 Fax: (858)689-2760 E-mail: info@vitrek.com
1-1. Description
The Vitrek V4 Electrical Safety Testers comply with the requirement for electrical equipment &
appliance control ordinances as defined by UL, CSA, JIS, BS and many other international standards.
The tester is ideal for AC & DC voltage withstand (Hipot), insulation resistance measurement and
ground bond testing on a wide variety of electrical equipment and components.
1-2. Features
The Vitrek V4 offers several features:
1) No load setup of trip current and output voltage
A safe way to setup trip current and output voltage without high voltage activated.
2) A large 24×2 character LCD with adjustable LED backlight
Provide a clear display about test parameters, which including group, step, mode, status, output
voltage, trip current and test time.
To Next Page
Loading...
