Vizio VM60P - Connecting Coaxial (RF); Using Your Antenna or Digital Cable for DTV

VIZIO VM60P HDTV User Manual
Version 3/26/2007 20
www.VIZIO.com
2.3 Connecting Coaxial (RF)
2.3.1 Using Your Antenna or Digital Cable for DTV
1. Turn off the power to the Plasma HDTV.
2. Connect the coaxial (RF) connector from your antenna or digital
cable to the DTV/TV CABLE/ANTENNA connector at the rear of
the Plasma HDTV.
3. Turn on the power to the Plasma HDTV.
4. Select DTV using the INPUT button on the remote or
side of the Plasma HDTV, or directly by pressing the
TV button on the Remote Control.
Note:
a) Not all digital TV broadcasts are High Definition (HD). Refer to the program guides, or
consult your cable, satellite or TV station operator.
b) Digital broadcasts are not available in all areas. Refer to www.antennaweb.org
for
detailed information.
c) Make sure the antenna and coaxial cable are correctly grounded.
d) For Professional antenna installation contact VIZIO at www.VIZIO.com
or call 1-888-
VIZIOCE (1-888-849-4623).