VIZIO VM60P HDTV User Manual
Version 3/26/2007 19
www.VIZIO.com
2.2.2 Using Component Video
Connecting your Cable or Satellite Box (Better):
1. Turn off the power to the Plasma HDTV and HDTV Set-Top Box.
2. Connect the Y (green color) connector on your HDTV Set-Top
Box to the corresponding Y (green color) connector in the
Component 1 group (green color area - row of connectors
nearest to you when viewing from the rear of the TV) at the rear
of the Plasma HDTV.
3. Connect the Pb (blue color) connector on your HDTV Set-Top
Box to the corresponding Pb (blue color) connector in the
Component 1 group (green color area - row of connectors
nearest to you when viewing from the rear of the TV) at the rear
of the Plasma HDTV.
4. Connect the Pr (red color) connector on your HDTV Set-Top Box to the corresponding Pr (red
color) connector in the Component 1 group (green color area - row of connectors nearest to
you when viewing from the rear of the TV) at the rear of the Plasma HDTV.
5. Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the Component output on your HDTV Set-Top Box and connect
the other end to the audio connectors associated with the Component 1 input (green color
area) at the rear of the Plasma HDTV.
6. Turn on the power to the Plasma HDTV and HDTV
Set-Top Box.
7. Select Component 1 using the INPUT button on the
remote or side of the Plasma HDTV, or directly by
pressing the Component button on the Remote
Control.
Note:
a) If you are already using the Component 1 input for another component, or you do not want
to use the Component 1 input for the Set-Top Box, you can connect the Set-Top Box to the
Component 2 connections coded by the orange area.
b) Refer to your HDTV Set-Top Box user manual for more information about the video output
requirements of the product or consult your cable or satellite operator.
To Next Page
Loading...
Need help?
General
